Dry Moly 16 oz

Dry Moly 16 oz

Your Price: $91.52
Part Number:QUA01172
SOLD BY THE CASE OF 12 CANS. 12-16 OZ. 12 OZ. NET WT. PER CAN

Features
● Adheres to Metal, Rubber, Glass and Most Plastics
● Effective at Temperatures from -110°F to +1000°F
● Waterproof
● Withstands High Pressure
● Excellent for Anti-Seize and Anti-Friction
Description
Quality Aerosols Dry Moly lubricant and coating is a superior long lasting dry lubricant that
adheres to almost all materials. Withstands high temperatures and pressures. Repels dust and
dirt and is resistant to water, alkalis and most acids. Greatly increases operating efficiency and
reduces maintenance costs. Prevents corrosion seizing, wear galling, binding, sticking, chattering,
squeaking and scraping. Designed for high pressure, load bearing applications. Excellent
for anti-friction and anti-seize where a dust and dirt resistant dry lubricant is desirable.
Applications Product Specifications
Our Dry Moly works on almost all materials. Color Charcoal
Withstands temperature ranges from -110°F to Odor Sweet Pungent
1000°F. Resists pressures up to 100,000 psi. Solids N/A
pH N/A
Specific Gravity 0.7865
Directions Physical State Liquid
Shake can before use for approximately 30 % VOC 55.00%
seconds. Surface must be free from loose rust, Evaporation Rate >1
oil, grease and old paint. Hold can 8-10 inches Boiling Point N/A
from surface and spray in a sweeping motion to Flash Point Concentrate: -20°C
insure a thin uniform coating. Allow first appli- Propellant: -132.23°F
cation to sit 3-5 minutes before applying second Storage Store in a cool, dry, and wellcoat.
IMPORTANT: To prevent clogging after ventilated area. Do not handle
each use invert can and spray a few short or store near open flame or
bursts to clear valve.