Murakami Photocure Pro	 gallon

Murakami Photocure Pro gallon

On sale $55.32
Part Number:ANC00036
Premium all purpose Dual Cure emulsion for
graphics, textile, and compact disc printing.
Photocure PRO
APPLICATIONS
PHYSICAL PROPERTIES
HANDLING
SENSITIZING
MESH PREPARATION
COATING PROCEDURE
DRYING
Photocure PRO Photocure PRO Photocure PRO Photocure PRO
PRODUCT T ECHNICAL DAT A SHEET
 MURAKAMI
MURAKAMI SCREEN USA, INC. 745 Monterey Pass Rd. Monterey Park, CA 91754
TEL: 323.980.0662, FAX: 323.980.0659 www.murakamiscreen.com
Premium all purpose Dual Cure emulsion for
graphics, textile, and compact disc printing.
• Blue colored dual cure direct emulsion
• For use with UV, plalstisol, solvent-based
 and water based ink systems
• Virtually pin hole and fish eye free
• Extremely durable on press
• Suitable for use with water based inks
 when hardened with Murakami
 Hardeners
• Outstanding resolution and definition
 properties
• 38% solids content
Handle under yellow safelights. Avoid
exposure to sunlight, flourescent and
incandescent lights.
Mix the sensitizer according to the
instructions on the bottle. Pour the
entire solution into the emulsion and
mix thoroughly. To reduce air bubbles
let the emulsion stand for two hours
(preferably overnight) before using.
It is important to remove any contamination,
residual inks, cleaning chemistry, or general
dirt and dust. Murakami 701 Haze/Ghost
Remover (a non-caustic water soluble liquid)
will remove residual ink and/or emulsion.
Murakami 801 Screen Degreaser will help
eliminate any further contaminants.
Completely dry the screen before coating.
• Use a clean dry coating trough that has
 a nick free surface for smooth coating.
• Apply one or two coats of emulsion to the
 print side. Rotate the frame 180 degrees
 and apply one or two coats of emulsion
 to the squeegee side.
• Additional coats may be added to the
 print side if thicker stencils are required.
Dry the coated screen horizontally with the
print side down in a clean light safe area.
The following will help to ensure complete
drying:
• 86° to 104° degrees F (30° to 40° C)
• 30% to 50% relative humidity
• Good air circulation
The use of a screen drying cabinet with
heated airflow can help in maintaining
these conditions.EXPOSURE RECLAIMING
WASHOUT
STORAGE AND HANDLING
SPECIAL APPLICATIONS
Photocure PRO Photocure PRO Photocure PRO Photocure PRO
 MURAKAMI
MURAKAMI SCREEN USA, INC. 745 Monterey Pass Rd. Monterey Park, CA 91754
TEL: 323.980.0662, FAX: 323.980.0659 www.murakamiscreen.com
• Use Murakami 501, 505 or 507 Screen
 Cleaner to remove all excess ink from the
 frame.
• Remove the emulsion with Murakami 601,
 605, or a solution of Strip Super-P. Rinse
 thoroughly.
• Use Murakami 701 to remove haze and
 ghost if required.
• Degrease with Murakami 801, rinse both
 sides thoroughly and let dry.
Store the emulsion in a cool dry area. Unsensitized
emulsion has a shelf life of at
least one year when stored at room
temperature.
Use the sensitized emulsion within 2-3
weeks for best results.
Coated screens may be stored for up to
one month when kept under the following
conditions.
• 59° to 77° degrees F (15° to 25° C)
• 30% to 50% relative humidity
Suitable for use with water based and
discharge inks when hardened with
Murakami Hardener and/or Hardener A&B.
Stencils treated with Hardener A&B
will not be reclaimable.
Clean the film positives and vacuum frame
glass prior to exposure to minimize
pinholes. Exposure is affected by mesh
color, emulsion type, coating thickness,
lamp type and the age of the bulb itself.
For best results use an exposure
calculator to determine the correct
exposure time. It is important that a
lamp designed for exposing screen
printing emulsions is utilized.
Note: The use of film positives that are
either frosted or have weak black density
can reduce resolution and definition
qualities of the coated screen.
Note: All exposure times listed above are
suggested times using a 5KW Metal Halide
lamp at a distance of 40”.
Gently spray both sides of the screen with
lukewarm water, wait a few seconds to allow
emulsion to soften then wash print side of
screen until image is fully open. Rinse both
sides thoroughly and dry. The use of a drying
cabinet or fans is recommended to dry the
screen.
Mesh/Inch Color Seconds
 86 120-140
 110 110-130
 200 100-120
 300
 350
W
W
Y
Y
Y
75-80
50-65

Related Items