Technical Data Sheet #350
Wet Ink Tack Low
After Flash Tack Low
Printability Excellent for fast production
Surface Appearance Satin finish
Bleed Resistance Good
Time 150° F (67º C)
Fusion Temperature 320°F (160° C)
Squeegee Hardness 70-80 durometer
Squeegee Blade Sharp
Squeegee Angle 45° to screen mesh
Emulsion Capillary Film or Liquid
Mesh Count 86 to 230 mc in (34 to 90
Storage 65°F to 95°F (18° C to
35° C) Avoid direct sun
Cleanup Bio-degradable screen
Color Range EL9073 NPT SF LB White
Substrate Type Polyester/Cotton Blend
Substrate Color(s) Light, Medium & Dark
EL9073 NPT SF LB White is opaque resulting in excellent coverage on dark garments. The low tack formula
allows printing through finer mesh counts without the need for a viscosity modifier. Use as an underlay
where great opacity is needed or as a stand-alone white. Has good low bleed characteristics for
printing on polyester/cotton blends.
• High performance white for polyester/cotton blends.
• Creamy, short body plastisol for easy printing.
• Low tack formula for fast shear action.
• User friendly, no viscosity modifiers necessary.
• Formulated with Rutland’s NPT technology to be non-phthalate
• Great opacity with quick flash.
• Low hot tack does not need a cool down station.
• Great value in this low bleed white
Print NPT SF Low Bleed White straight from the container. NPT SF Low Bleed White is user friendly and
may be printed through mesh ranging from 86 to 230 mc in (34 to 90 mc cm) without modification of
the viscosity. The tack free formulation allows increased coverage; therefore use finer mesh counts for
the softest hand and good opacity.
*Note to 100% Cotton users: 100% Cotton could have a ghost image appear if printed with low bleed
inks. NPT SF Low Bleed White is a low bleed ink and should not be printed on 100% Cotton. NPT SF
Low Bleed White is recommended for polyester/cotton blends.
NOTE: Poorly dyed polyester or too much heat in the curing process can overcome any low bleed inks
ability to block the migration. For severe migration use ES0266 Barrier Base as an underlay.
Claira Colors™, Whites bases, modifiers and additives should be mixed in clean vessels using clean mixer blades
and utensils. Any contamination from other ink sources or non approved additives could make Claira Colors™ test
positive for the restricted phthalates.
• Do not dry clean, bleach, or iron the printed image.
Rutland Plastic Technologies does not knowingly add plasticizers containing the phthalates listed and
outlined in California Bill 1108, CPSC HR-4040 and Oeko-tex Standard 100. The plasticizers identified may
include di-(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP), benzyl butyl phthalate (BBP),
diisononyl phthalate (DINP), diisodecyl phthalate (DIDP), di-n-octyl phthalate (DnOP), (DIBP) Di-iso-butyl,
and (DMP) Dimethylphthalate, including esters of ortho-phthalic acid and are not direct ingredients in the
manufacture of Claira™ NPT SF LB White nor any of the Claira Specialty inks. Rutland Plastic Technologies
does not test the final product for amounts of the aforementioned phthalate plasticizers and esters and
encourages all users to conduct testing for their intended use.
Claira™ Street Fighter White
EL9073 NPT SF LB White
ANY APPLICATION NOT REFERENCED IN THIS TECHNICAL DATA SHOULD BE
PRE-TESTED OR CONSULTATION SOUGHT WITH RUTLAND’S APPLICATIONS
LABORATORY PRIOR TO PRINTING. CALL 704-553-0046 EXT. 192 FOR MORE