A fast drying “waterproof type” film that satisfies the needs of the most demanding silkscreen printer,
at a surprisingly affordable price.
Its UV densities easily match those of silver films.
Works great with either pigment or dye-based ink
As always, product satisfaction is guaranteed
Always use high resolution images for best results.
1440dpi for line images, lower is ok for halftone work
Make sure you have the film loaded correctly.
Be sure that the coated side will be face-up under the print head
Always use the highest resolution you can.
This will often be determined by how fast you want the film to image.
The higher the resolution the slower the image speed.
Adjust the amount of ink to ensure maximum density while still drying
In most cases the ink will be touch dry as the film comes out of the printer
Ensure that your emulsion has fully dried before attempting to expose
The image on the film will be damaged if the emulsion is still wet or tacky
To re-use the film it is best stored with clean paper between each sheet of film
Store in a dry environment