• Super Fast Acting

• Biodegradable

• Non-Flammable

• Non-Hazardous

• Contains No VOCs

• No Odor

Manual Cleaning: Once printing is complete, scrape excess ink from the print side of the screen. Apply Complete by spray or wipe to the print side of the screen and scrub. After the ink and emulsion are fully solubilized; apply a high pressure rinse to the print side and the well (ink) side of the screen. As a final step, apply a Kor-Chem Ink Remover to both sides of the screen, then high pressure rinse both screen sides. Flood rinse entire screen with low pressure rinse.

Dip Tank Cleaning: Fill dip tank with water and then add Complete at a ratio of 1 part Complete with up to 9 parts of water. Solution concentration may vary based on screen mesh count, type of ink & emulsion used and amount of ink left on the screen. Once printing is complete, scrape excess ink from the print side of the screen. Place screens in dip tank with Complete solution. Once inks and emulsions are fully solubilized, remove screens and apply a high pressure rinse to both sides of the screen. Flood rinse entire screen with low pressure rinse.

TYPICAL PRODUCT PROPERTIES

Appearance: Clear, colorless liquid

Odor: None

pH: 4.5

Flash Point:  None

Specific Gravity: 1.06

Weight, per U.S. gallon: 8.8 lbs.

Stability:  Stable

DOT Shipping:  Non-hazardous

AVAILABLE PACKAGE SIZES

55 Gallon Drum 

30 Gallon Drum 

5 Gallon Pail 

4x1 Gallon Case