Full Strength, Ready to Use Emulsion Remover
ER-188 is a full strength emulsion remover designed for fast removal of emulsions and capillary films from screens.
• Immediately breaks down hardened emulsion
• No odor
• Safe on all types of mesh
• Contains No VOCs
Before using, clean the ink from the screen with non film forming ink remover such as Bio-1. As a good pre-rinse step, rinse the screen with water to remove any block-out. Spray on ER-188 in a uniform pattern onto the print contact side of the screen. In some cases better results are obtained by applying ER-188 onto both sides of the screen. Allow to stand up to 3 minutes depending on the type and hardness of the emulsion. Remove the emulsion using a medium to high pressure cold water rinse. Flush the screen with a final rinse to remove any trace chemicals left on the screen. Allow to dry completely before recoating.
TYPICAL PRODUCT PROPERTIES
Appearance: Clear, colorless liquid
Flash Point: None
Weight, per U.S. gallon: 8.5 lbs.
DOT Shipping: Non-hazardous
AVAILABLE PACKAGE SIZES
55 Gallon Drum
30 Gallon Drum
5 Gallon Pail
4x1 Gallon Case
Please call if interested in drum sizes so we can get you an accurate freight quote.