NPT ORANGE CONC

Claira™ C3 Non-Phthalate Color Booster mixing system is a single pigmented color system with built in binders. No need to worry about pigment overload with these concentrates. They may be used at up to 50% in Rutland’s NPT bases to mix non-phthalate printing inks. C3 Color Boosters directly replace both the EB and CB products.Concentrated single pigment primary colorsNon-phthalate for mixing environmentally safe plastisol inksLow crock and matte finish when mixed in NPT HO Matte BaseUse Rutland’s NPT VO Base for maximum opacity

Mix thousands of colors by using Claira™ C3 Non-Phthalate Color Boosters in any of the Claira™ Non-Phthalate Specialty bases per the formulations found in the M2007 Ink Mixing software. Simply mix the C3’s with the appropriate nonphthalate base (see Bases on next page). Printing on White Garments: Mix per formulation or custom blend to achieve brilliant colors on 100% cotton whites. For extremely soft-hand prints, mix finished color (C3 plus base) with up to 1:1 with Claira NPT Chino Base Printing on Dark Garments or over an underlay: When printing on dark garments, mix per formulation or custom blend to achieve brilliant colors over an underlay . Use the NPT Low Bleed White on poly/cotton blends and the NPT Barrier base when printing on 100% polyester Puff designs: Mix 10-15% of Claira NPT Puff Additive to any formulated Claira™ Color (C3 plus base) to create a puff ink. PRODUCTS

Claira Colors™, bases, modifiers and additives should be mixed in clean vessels using clean mixer blades and utensils. Any contamination from other ink sources or non-approved additives could make Claira Colors™ test positive for the restricted phthalates. Do not dry clean, bleach, or iron the printed image. Note to 100% Cotton users: With low bleed ink, 100% cotton could produce a ghost image. Claira NPT Low Bleed White is a low-bleed ink and should be tested for ghosting before printing on 100% cotton. Claira NPT Low Bleed White is not recommended for 100% polyester. Use Claira NPT Barrier under base for 100% polyester.

Rutland Plastic Technologies does not knowingly add plasticizers containing the phthalates listed and outlined in California Bill 1108, CPSIA HR-4040 and Oeko-tex Standard 100. The plasticizers identified may include di-(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP), benzyl butyl phthalate (BBP), diisononyl phthalate (DINP), diisodecyl phthalate (DIDP), di-n-octyl phthalate (DnOP), (DIBP) Di-iso-butyl, and (DMP) Dimethylphthalate, including esters of ortho-phthalic acid and are not direct ingredients in the manufacture of Claira High Opacity Non-Phthalate Inks. Rutland Plastic Technologies does not test the final product for amounts of the aforementioned phthalate plasticizers and esters and encourages all users to conduct testing for their intended use.