NPT SNAP WHITE
EL9240 NPT Snap White is formulated as low bleed, press-ready plastisol for printing on Cotton (pre-test potential to ghost) and polyester/cotton fabrics. This product is excellent for printing through a variety of mesh ranges to give great opacity and smooth finish. Creamy, short body plastisol for easy printing. Tack free formulation for fast shearing action. Fast flash, first down white with low after tack. Optically brightened to produce superior whiteness and opacity.
- Fast flashing.
- Creamy plastisol for easy printing.
- Low tack formulation for fast shearing action.
- Multipurpose low bleed White
Print EL9240 directly onto 50/50 substrates to obtain ultimate opacity and bleed resistance. EL9240 may be applied as an underlay white when printed through mesh ranges from 86-230 mc./in. (34-90 mc./cm.) to achieve very fine details and halftones, or can be printed as a stand alone white for maximum whiteness. The quick flash characteristics of this product allow it to function either way. NOTE: Poorly dyed polyester or too much heat in the curing process can overcome any low bleed inks ability to block the migration. For severe migration use ES0266 Barrier Base as an underlay. EL9240 NPT Snap White is recommended for cotton (pre-test the potential to ghost) and polyester/cotton blends.Recommendation:
Do not dry clean, bleach, or iron the printed image.Statement:
There may be potential to ghost on some fabrics due to the dyes used. Thoroughly pre-test this product on light colored or stone washed garments. Avoid conditions that may increase potential to ghost such as stacking printed garments while hot. Due to variations in garments and dyes used, always test for your use conditions.
Rutland Plastic Technologies does not knowingly add plasticizers containing the phthalates listed and outlined in California Bill 1108, CPSIA HR-4040 and Oeko-tex Standard 100. The plasticizers identified may include di-(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP), benzyl butyl phthalate (BBP), diisononyl phthalate (DINP), diisodecyl phthalate (DIDP), di-n-octyl phthalate (DnOP), (DIBP) Di-iso-butyl, and (DMP) Dimethylphthalate, including esters of ortho-phthalic acid and are not direct ingredients in the manufacture of Claira High Opacity Non-Phthalate Inks. Rutland Plastic Technologies does not test the final product for amounts of the aforementioned phthalate plasticizers and esters and encourages all users to conduct testing for their intended use.Disclaimer: Not all Rutland products are available in every country. Please check with your local representative for availability. The data presented in this leaflet are in accordance with the present state of our knowledge, but do not absolve the user from carefully checking all supplies immediately on receipt. We reserve the right to alter product constants within the scope of technical progress or new developments. The recommendations made in this leaflet should be checked by preliminary trials because of conditions during processing over which we have no control. Recommendations for use do not constitute a warranty, either express or implied, of the fitness or suitability of the products for a particular purpose.
Product Overview:Brand: Rutland
Product Code: EL9240
Application: Screen Printing
Category: White Inks
Substrate(s): Blends, Cotton
Best Used By: 12 months
Curing:Fusion Temperature: 320°F
Gel Point: 150°F
Finish: Satin Finish
Coverage: High Opacity
After Flash Tack: Low
Bleed Resistance: Good
Angle: 10° - 20°
Screen:Mesh: 86 to 230
Emulsion Types: Capillary film, Liquid emulsion
Cleanup: Bio-degradable screen wash
Storage:Storage Temperature: 65°F - 95°F (18°C - 35°C)
Storage Notes: Avoid direct sun.