NPT SPAND-E-SOL STRETCH CLEAR INK
ES NPT Spandesol inks can be printed on Lycra Spandex (Nylon Lycra) to provide good stretch and softness to the design. Colors can be created by mixing C3 Color Boosters into ES0031 NPT Clear using the C3 recipes in the M2007 Ink Mixing Software.ES NPT Spandesol is a press-ready plastisol designed for printing on nylon lycra fabrics.Formulated to have good adhesion properties in addition to increased elongation.Add NPT Spandesol Clear as a stretch additive to improve stretch of other NPT plastisol inks
- Non-Phthalate formulation to comply with new regulations restricting phthalates.
Print NPT Spandesol colors through 86 mc in (34 mc cm). Insure that a sufficient amount of ink is printed down to completely bridge the ribs of the substrate to provide adequate stretch. Mix up to 30% C3 Color Boosters into ES0031 to create colors. Add up to 30% NPT Spandesol Clear to improve stretch of other NPT Plastisol inks. Available Product: ES0031 NPT Spandesol Clear ES9003 NPT Spandesol White ES8396 NPT Spandesol BlackRecommendation:
Do not dry clean, bleach, or iron the printed image. Note: This is not a low bleed ink. Do not print on polyester fabrics. Claira Colors™, bases, modifiers and additives should be mixed in clean vessels using clean mixer blades and utensils. Any contamination from other ink sources or non approved additives could make Claira Colors™ test positive for the restricted phthalates.Statement:
Rutland Plastic Technologies does not knowingly add plasticizers containing the phthalates listed and outlined in California Bill 1108, CPSIA HR-4040 and Oeko-tex Standard 100. The plasticizers identified may include di-(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP), benzyl butyl phthalate (BBP), diisononyl phthalate (DINP), diisodecyl phthalate (DIDP), di-n-octyl phthalate (DnOP), (DIBP) Di-iso-butyl, and (DMP) Dimethylphthalate, including esters of ortho-phthalic acid and are not direct ingredients in the manufacture of Claira High Opacity Non-Phthalate Inks. Rutland Plastic Technologies does not test the final product for amounts of the aforementioned phthalate plasticizers and esters and encourages all users to conduct testing for their intended use.Disclaimer: Not all Rutland products are available in every country. Please check with your local representative for availability. The data presented in this leaflet are in accordance with the present state of our knowledge, but do not absolve the user from carefully checking all supplies immediately on receipt. We reserve the right to alter product constants within the scope of technical progress or new developments. The recommendations made in this leaflet should be checked by preliminary trials because of conditions during processing over which we have no control. Recommendations for use do not constitute a warranty, either express or implied, of the fitness or suitability of the products for a particular purpose.
Coverage: Medium Opacity
After Flash Tack: Slight
Angle: 10° - 20°
Screen Tension: As recommended for mesh
Flood Stroke: Load ink into mesh opening
Underlay: ES9003 NPT SpandeSol White
Emulsion Types: Capillary film, Direct, Indirect
Cleanup: Bio-degradable screen wash
Additives:Extender: Not recommended
Thickener: M00010 Thickener #10
Storage:Storage Temperature: 65°F - 95°F (18°C - 35°C)
Storage Notes: Avoid direct sun.