Technical Data Sheet #338
Wet Ink Tack Low
After Flash Tack Low
Printability Excellent for fast production
Surface Appearance Satin finish
Bleed Resistance N/A
Gel Point/Flash Time 150° F (67º C.)
Fusion Temperature 320°F (160° C.)
Squeegee Hardness 70-80 durometer
Squeegee Blade Sharp
Squeegee Angle 45° to screen mesh
Emulsion Capillary Film or Liquid Emulsion
Mesh Count 86 to 230 mc in (34 to 90 mc cm)
Storage 65°F to 95°F (18° C to 35° C) Avoid direct sun
Cleanup Bio-degradable screen wash
Color Range EH9072 NPT SF2
Substrate Type 100% Cotton
Substrate Color(s) Light, Medium & Dark Colors
EH9072 NPT SF2 Cotton White is an easy printing opaque white resulting in excellent coverage on dark garments. The low tack formula allows printing through finer mesh counts without the need for a viscosity modifier. Use as an underlay where good opacity is needed or as a stand-alone white.
• Economical, high performance white for 100% Cotton.
• Creamy, short body plastisol for easy printing.
• Low tack formula for fast shear action.
• Formulated as a Non-phthalate product
• Great opacity with quick flash.
• Low hot tack does not need a cool down station.
• Will not cause *ghost on 100% cotton.
Print EH NPT SF2 Cotton White straight from the container through mesh ranging from 86 to 230 mc in (34 to 90 mc cm) without modification of the viscosity. The tack free formulation allows increased coverage; therefore use finer mesh counts for the softest hand and good opacity.
Claira Colors™, bases, modifiers and additives should be mixed in clean vessels using clean mixer blades and utensils. Any contamination from other ink sources or non approved additives could make Claira Colors™ test positive for the restricted phthalates.
• Do not dry clean, bleach, or iron the printed image.
Claira™ NPT Non-Phthalate Inks - White
EH9072 NPT SF2 Cotton White
ANY APPLICATION NOT REFERENCED IN THIS TECHNICAL DATA SHOULD BE PRE-TESTED OR CONSULTATION SOUGHT WITH RUTLAND’S APPLICATIONS LABORATORY PRIOR TO PRINTING. CALL 704-553-0046 EXT. 151 FORMORE INFORMATION.
Rutland Plastic Technologies does not knowingly add plasticizers containing the phthalates listed and outlined in California Bill 1108, CPSIA HR-4040 and Oeko-tex Standard 100. The plasticizers identified may include di-
(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP), benzyl butyl phthalate (BBP), diisononyl phthalate (DINP), diisodecyl phthalate (DIDP), di-n-octyl phthalate (DnOP), (DIBP) Di-iso-butyl, and (DMP) Dimethylphthalate, including esters of ortho-phthalic acid and are not direct ingredients in the manufacture of Claira™ High Opacity Non-Phthalate Inks. Rutland Plastic Technologies does not test the final product for amounts of the aforementioned phthalate plasticizers and esters and encourages all users to conduct testing for their intended use.